EFI Wet Nitrous System (Single Nozzle)

$469.97

This is a complete Dynotune Nitrous Wet Kit with a single nozzle.
Comes with a 10lb bottle, nozzles, jets, solenoids, nitrous lines, wire harness, switches, EVERYTHING!

We like to list products that are proven and tested, with nearly 10 years of using this kit in one of the fastest maxima’s in the USA we are happy to offer this to you.

Out of stock

SKU: dtsinglenozzlekit Category:

Description

This System will work on 4 or 6 cylinder engines. The system is adjustable from 35 to 75 HP by changing the jets included. It can go up to 150hp with different jets.

This Universal EFI wet Kit is the most complete kit available all the way down to the Tap for the nozzle. Quality stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass.

Parts Included:

– 10lb bottle with high flow valve
– 4AN bottle nut & Teflon washer
– Stainless quick connect Bottle brackets and hardware
– 16 foot braided stainless feed line, blue fittings
– High Flow Nitrous and Fuel solenoids
– Solenoid mounting bracket
– 2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings
– Braided stainless line for Fuel rail test port installation, red fitting
– Jets for 35, 50 and 75HP (max 175hp with different jets)
– High flow Wet Nozzle
– Wet Nozzle Mounting adaptor so the Nozzle does not blow out during injection causing a fire, makes mounting the nozzle in plastic or rubber a snap!
– Nozzle tap
– 5/16″ fuel injection hose with clamps and brass “T”, all fittings and clamps for a complete installation
– Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..
– Micro throttle activation switch and mounting bracket
– A 22 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for all the fuel injection applications

Additional information

Weight 25 oz